SNMP Monitoring Software #network #monitor, #network #monitoring, #server #monitor, #exchange #server,


#

SysUpTime Network Monitor

Current Version: 6.1 (build 6204)

SysUpTime network/server monitor is a powerful agentless network management software. It provides users out-of-box capabilities to efficiently and proactively manage any network of any size.

SysUpTime network monitor is easy to set up and use. It can monitor the availability and performance of your Windows and Linux/UNIX servers, workstations, software applications (SQL, Exchange, Web Servers, etc), and network devices (routers, switches, etc). When a failure is detected, SysUpTime network monitor can alert the administrators by email, sound, running a script or other methods, as well as taking corrective actions such as executing remote Windows/Linux command, rebooting the machine, restarting the Windows/Linux service or running a script.

SysUpTime network monitor’s server runs on both Windows and Linux.

Key Features:

Automatic Network Discovery and Accurate Topology Map

Automatically discovers layer 1, 2 and 3 networks, gathering topology data to deliver complete and accurate maps of devices and connectivity across networks. Powerful map editing function allows user to add or change discovered map easily.

The combination of unique extensible mediation layer technology and CIM (Common Information Model) based object model enables SysUpTime network monitor to support new devices and applications on an ongoing basis with minimum efforts.

Major features of network discovery and topology maps:

  • Support for a wide range of network devices and new devices can be easily added.
  • Configurable filters to narrow down the scope of discovery.
  • SNMP v1/v2c/v3 discovery.
  • Scheduled discovery.
  • Support for VLAN, HSRP, VRRP.
  • Custom views, which are user-defined maps based on IP address, location or other selection criteria.
  • Automatically discovered topology maps contain properties of network devices such as servers, routers, etc. Device list can be exported to a CSV file.
  • Devices can be manually added to topology map.
  • New properties or notes, such as license info, installed software, purchase price, can be manually added to devices. You can do search to find device with certain property.

Trended Performance, Status, and Service Monitoring

Detailed monitoring of network availability and performance.

  • Fully Automated Performance Monitoring

Core monitoring capabilities include:

  • Ping monitor
  • SNMP monitor(supports SNMP v1/v2c/v3 monitors)
  • MS Exchange server monitor
  • WMI monitor (Windows Services, Processes, CPU/Disk Utilization, etc.)
  • TCP/UDP port monitor
  • URL (HTTP/HTTPS) monitor
  • Telnet/SSH-2 monitor
  • FTP/File/Directory monitor
  • DNS/LDAP/RADIUS server monitor
  • Windows Event Log monitor
  • SMTP/POP3/IMAP4 server monitor
  • Database SQL monitor for all major database servers

More network/server monitoring capabilities are scheduled to be added soon.

  • Self-learning Dynamic Statistical Baseline (based on historical data)
  • Multi-level Fixed Thresholds

Real-time, End-to-End Event Management

SysUpTime network monitor collects and consolidates events and alarms. Event de-duplication, event auto-clearing, robust alerting, automated actions, and alarm escalation help organizations identify potential problems faster, shorten mean-time-to-repair and reduce IT and operations costs.

Core capabilities of event management include:

  • Supports SNMP v1/v2c/v3 traps and informs
  • Event reduction
  • Event clearing
  • Alarm escalation
  • Event forwarding
  • Event categorization

SysUpTime network monitor offers a wide range of alerting actions. Major actions include:

  • Send to different email accounts at different time.
  • Forward to another trap receiver.
  • Post to a web site using GET or POST methods.
  • Run remote command via SSH, Telnet or Windows RPC.
  • Run command.
  • Play sound.
  • Built-in Reporting and Graphing

    SysUpTime network monitor offers real-time and historical reporting and graphing capabilities for performance monitors, and top-N reports for users to identify problem elements. Scheduled reports in PDF format can be generated by month, week or day.

    Application monitoring helps you diagnose application problems, and prevent downtime or network performance degradation. SysUpTime network monitor provides out-of-box support for MS Exchange Server and SQL server. It can be configured to monitor critical parameters of both servers and their services.

    High Availability and Scalability

    SysUpTime’s server clustering technology allows two or more servers that are interconnected to form a unified virtual computing resource.

    Clustering servers increases the availability of a system by ensuring that if a server becomes unavailable because of failure or planned downtime, another server in the cluster can assume the workload, ensuring that the monitoring service is uninterrupted. Clustering also enhances scalability by automatically distributing workloads across all the available servers.

  • Key Benefits

    • Intuitive graphical user interface minimizes training requirements and increases productivity
    • Advanced fault management minimizes equipment downtime
    • Measure and report real time performance against designated SLA
    • Preempt performance problems by identifying potential trouble spots before they affect service quality
    • Increased operational efficiency
    • Use trending data to make the most of network resources and forecast CapEx needs
    • Protect existing investments — can be integrated with existing management systems
    • Implement high-quality management capabilities priced to suit enterprise IT budgets

    Professional and free personal editions

    The free personal edition is intended exclusively for private use on a single workstation. You may copy the complete program package and pass it on to others for private use only. The free personal edition may not be used for commercial or professional purposes.

    The professional edition has many more features and can be used for commercial or professional purposes.

    Features Table


    09/10/2017

    Posted In: NEWS

    Tags: , , , , , , , , , , , ,

    Leave a Comment

    Fiber Optic Installation – Inspection and Copper Cable Testing Tools #it


    #

    Punch Down and Termination Tools

    The best installations start with the best tools. And you can get the best tools from one trusted provider – Fluke Networks. Our network installation line encompasses all the essential tools needed for a job done right! From our innovative JackRapid™ punchdown tool to our forged steel constructed D-Snips cable scissors, look to Fluke Networks.

    Case Studies

    ITM, a UK-based leading independent provider of specialist ICT infrastructure solutions and services, applies best of breed technology, in-house expertise and innovation to deliver standards compliant solutions and services to clients throughout the UK, Europe and the rest of the World. Stuart Ayres, ITM Fibre & Equipment Engineer, reviewed the results of their investment in twenty Versiv Cabling Certification Systems.

    After using the Versiv System for a few months it clearly offers several advantages when compared to the previous generation of test equipment. Not only is the Versiv System faster, the modular design and online connectivity dramatically reduces our engineers travel time as they no longer need to call into the office to have test results downloaded or firmware updated.

    During the few months that we have been using the new equipment I have identified the following advantages that translate into productivity gains for both ITM and our Customers:

    • Greatly reduced test cycle times for both copper and fibre.
    • Easy and fast movement of test data from site to office enables better project progress reporting, quicker sign-off and invoicing.
    • Ability to remotely configure and control the test units.
    • Simplified logistics, we now only have to maintain one fleet of modular multi-purpose test equipment.

    The Ultimate Test in the Alaskan Bush Survival Tip: Take care where the bears roam

    Integrity Networks provides communications services and cable and fiber network infrastructure installation for companies and federal, state and local governments nationwide and around the Pacific Rim. Based in Renton, Washington, their projects range from military bases in Guam and Singapore, data center and VOIP installations in Washington and Virginia, to major healthcare and corporate oil, gas and mining projects across Alaska.

    Integrity Networks entered the Alaskan market in 2007, and it has remained a steady presence in low-voltage contracting there ever since. With branch headquarters in Anchorage, Integrity Networks has an extensive staff of highly skilled Alaskan employees that work on jobs in the last great American frontier.

    EXTREME DANGER: High Voltage Environment

    With Fluke Networks OptiFiber® Pro OTDR with SmartLoop™, Twistnet technicians safely completed bidirectional certification of new North Sea Wind Farm installation

    Established in 2000, with more than 30 years of experience, Twistnet Communications Ltd. specializes in the installation, testing and certification of fiber optic cabling, structured cabling systems and voice cabling systems.

    Twistnet Communications Ltd serves companies in the United Kingdom and Europe with core services and it offers experts in fusion splicing, direct fiber termination, OTDR and power-meter testing and certification and repair with state of the art equipment such as the Fluke Networks’ OptiFiber Pro OTDR with SmartLoop, part of the Versiv™ line, the industry’s leading Cabling Certification System

    By leveraging Versiv DSX-5000, CertiFiber and LinkWare Live, PowerCom has significantly reduced the time and effort needed to test the systems and provide results to their customers.

    Challenge: PowerCOM installs and services a wide range of information and communication systems including; voice, data, Wi-Fi, security and monitoring at a variety of both indoor and outdoor locations. With over 80% of employees working in the field on multiple client sites, delivery of test results to the PowerCOM office and/or client is often challenging. Historically, the process to set up test equipment and compile results has been manual and time intensive for both field and administrative staff. Additionally, some customers desired more frequent and periodic delivery of detailed test results, rather than only upon project completion. To address these issues, PowerCOM required a solution that could help their technicians and administrative staff be more efficient, as well as readily and more easily share data with their customers.

    Results: By leveraging Versiv™ DSX-5000, CertiFiber® Pro and LinkWare™ Live, PowerCom has significantly reduced the time and effort needed to test the systems and provide results to their customers. Instead of requiring the field technicians to set-up test parameters and commute to the office to deliver/review the test reports, these tasks can be done remotely through the cloud. By leveraging LinkWare Live, PowerCom technicians can complete jobs faster, ensure test accuracy and reduce the potential for rework.

    Fluke Networks is pleased to announce that ECR Informatique, a leading company in the cable installation market, acquired the new Versiv platform, now with a fleet of 7 cable certifiers with DSX-5000 replacing DTX-1800 in order to consolidate its position and deployment in structured cabling solutions systems at both DataCenters and horizontal cabling levels.

    Created in 2001 and located in Calvados (France), ECR specializes in cable installation of all types of local area networks (copper, fiber, wireless, laser) in standard or special environments or subject to manufacturers certifications. ECR acts on behalf of businesses, local communities, public and private institutions (education, health. ) on their main site or remote facilities, and is also a subcontractor for major clients taking charge of large scale projects featuring local networks


    29/09/2017

    Posted In: NEWS

    Tags: , , , , , , , , , , , ,

    Leave a Comment

    Dashboard Software #dashboards, #excel #dashboards,dashboard #software,dataviz,excel #dashboards #software #excel #dashboard, #access


    InfoCaptor Business Intelligence Super easy data discoveryDrag and drop visual analyticsBest Dashboard DesignerCreate Dashboard MockupsD3js based visualizationsFully web basedEnterprise ReadyScalable from department to 1000s of usersSuper AffordableGoogle AnalyticsSalesforceCSV FilesPackaged Data warehouse

    InfoCaptor is an extremely competent product, capable of addressing many BI, data visualisation and analytics needs at a very modest price. Deployment can either be in-house or on the web, and in either case the interface is browser based. This is a pragmatic, ‘get-the-job-done’ solution without the surface gloss and high prices charged by other suppliers.
    Martin Butler. Butler Analytics

    Free business intelligence and dashboards

    Why spend thousands and millions in business intelligence tools? InfoCaptor is free for Startups, Non-profits and students InfoCaptor the cheapest dashboard software

    Excel Dashboard Software

    Stop building dashboards in Excel! InfoCaptor provides a clear path to keep your data and dashboard presentation separate. Works with CSV, Excel or any TXT datasets

    Rapid Analytics

    It takes under 10 mins to build your first dashboard. Drag drop visual analytics does not limit you thinking in terms of X and Y axis. Rapidly change visualizations to see data from different angles. Keep what you like and package them into published dashboards.

    Ad-hoc Visualization

    Drag and Drop Visual Analyzer for self-service data exploration. Takes only few clicks from data to final dashboards.

    Prototyping Mockups/Dashboards

    Provides a prototyping and flowcharting engine for quick dashboard mockups.Free style placement of widgets.[no restrictive grids]

    Collaboration

    Projects and user groups for collaborative work. Embed dashboard or individual widgets LIVE on any web page. Integrate executive dashboards straight into your sharepoint portal or your website for live interactions

    Data Sources

    Variety of JDBC and ODBC sources including Microsoft Excel, Microsoft Access, Oracle, SQL Server, MySql, DB2, Progress,Sqlite,PostgreSQL, Hadoop Hive, Cloudera Impala and HTTP API for web services

    Security and Data Governance

    Enterprise user access control mechanism.Integrates with LDAP or Active Directory.Public or private dashboards.

    Visualizations

    Comprehensive library from pivot tables to bars, stacks,area and scatter plots. Hierarchical visualizations such as Circle pack, Treemap, sunburst and cluster charts. Trellis and small multiples.

    How is InfoCaptor unique and different

    InfoCaptor is simply a web based application that works on every platform [windows, linux/unix or Mac].

    Web and browser based dashboard designer and bi tools are a must to establish a firm data-driven culture. Why spend thousands of dollars on each desktop license and then millions of dollars on server licenses?

    Compared to other vendors like Tableau or Qlikview, InfoCaptor is extremely affordable.

    • Quickly upload CSV data and build Excel Dashboards
    • Simply connect to any SQL database and build live SQL dashboards
    • Use Hadoop connectors for Bigdata and make bigdata dashboards
    • Free dashboard software for Startups, Students and Non-profits

    InfoCaptor Visual Analyzer enables you to rapidly browse datasets and spin it across variety of visualizations

    No SQL knowledge necessary. No Technical skills needed.

    Explore InfoCaptor’s Features and Benefits

    • Self service Adhoc analysis
    • Bird’s Eye view of entire operation
    • Quick prototyping
    • Public dashboards – accessible as web page URL
    • Dynamic dashboards with filters/parameters
    • Unlimited drill downs
    • In-memory packaged dashboards
    • Static dashboards for mockups and prototyping
    • Visual Alerts
    • Motion Alerts
    • Email Alerts
    • Sound Alerts
    • Flowchart and Prototyping Engine
    • Vector Charts – SVG and HTML5
    • D3js based advanced visualization
    • Awesome Visual Analyzer
    • Gauges/Dials for KPI monitoring
    • Bullet chart/graph for performance tracking
    • Bar charts/Group/Column bars
    • Line chart and Area chart
    • Scatter charts and Bubble Scatter chart
    • Circle Pack and Treemap
    • Chord and Sunburst
    • Cluster diagrams

    Has InfoCaptor Convinced you?

    If so, click to buy now, including 60 minutes of dashboard development for free!

    Wow, This tool has amazing capabilities!

    This tool has amazing capabilities and can analyze from simple spreadsheets to complex data sources with ease and that too in your browser. I can stitch several spreadsheets with ease by just copy pasting the required elements and analyze further.Visualizations are amazing. Great product for non enterprise users too! Parag Khadye – BI Manager at Accenture

    Selected Media mentions

    Selected People who mentioned InfoCaptor visualizations (you could be one)


    26/09/2017

    Posted In: NEWS

    Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

    Leave a Comment

    Bandwidth Monitor – Monitor Bandwidth, Network Bandwidth Monitor, Bandwidth Monitor Software,


    #

    Bandwidth Monitor

    Network monitor

    Network monitor

    Bandwidth Monitor 3.4 build 757 released!

    Bandwidth Monitor monitors bandwidth usages through computer it’s installed on. The software displays real-time download and upload speeds in graphical and numerical forms (refer to screen shot below), logs bandwidth usages, and provides daily, weekly and monthly bandwidth usage reports. Bandwidth Monitor monitors all network connections on a computer, such as LAN network connection, Internet network connection, and VPN connection.

    Bandwidth Monitor also offers useful built-in utilities: speeds stopwatch, transfer rates recorder, and bandwidth usage notification. And, the software supports running as a system service that monitors bandwidth usages and generate traffic reports automatically without log on.

    Bandwidth Monitor works with the majority network connections including modem, ISDN, DSL, ADSL, cable modem, Ethernet cards, wireless, VPN, and more. It’s full compatible with Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 7, Windows 8 , and Windows 10 .

    Network monitor Free Download Bandwidth Monitor Network monitor Take a Tour of Bandwidth Monitor

    Network monitor

    How does Bandwidth Monitor Work?

    • Bandwidth Monitor detects network connections on computer it’s installed on and monitors bandwidth through the connections
    • Display real-time download and upload speeds, and logs to history
    • You can view bandwidth usages reports by daily, weekly, monthly, and total in the software
    • The software notifies you to avoid going over bandwidth caps.

    Bandwidth Monitor is 100% clean and safe to install. It’s certified by major download sites.

    Network monitor

    Top 11 Benefits of Bandwidth Monitor:

    1. Network bandwidth monitoring

    You can view the traffic flow of your network connections (LAN and WAN) in real-time using Bandwidth Monitor. The software is full compatible with all kinds of network connections.

    If your computer connects to Internet via a dial-up connection based on modem, ISDN, DSL, ADSL, cable modem, or VPN, you can monitor the Internet bandwidth in real time and get your total bandwidth usages to avoid overshooting your Broadband limitation.

  • Views download and upload speeds in real-time

    You can view the download and upload speeds of your network or Internet connections in real-time. Bandwidth Monitor supports two units: kB/sec (kilobytes per second) and kbps (kilobits per second).

  • Multiple network connections monitoring at a time

    It’s very useful when you want to monitor the Internet and LAN connections network traffic on one computer at the same time. You can also monitor traffic rates of ALL network connections on your computer.

  • Gets daily, weekly, monthly and annual network traffic report

    Bandwidth Monitor provides daily, weekly, monthly and summary traffic report. You can easy to get your bandwidth usages of every day, every week, every month, every year, or in total.

  • Bandwidth usage notification

    You can set a notification that alerts you when you exceed a certain amount of bandwidth usage for a specific connection.

  • Monitor bandwidth usage of your server

    Bandwidth Monitor supports running as a system service. This means the software monitors bandwidth usage of your server without log on. The service monitors bandwidth usage, record rates, and generate traffic report in txt, csv, and html formats every N seconds. So, you can export traffic reports in html file to your web directory, and then browse the file to view bandwidth usage anywhere and anytime.

  • Tests download and upload speeds of a network connection within a user-specified period

    The built-in speeds stopwatch can help you to test the download and upload speeds of an network or Internet connection.

  • Records traffic rates of a specified network connection

    You can record download upload speeds of one or more network connections and export to a text or Microsoft Excel .csv file.

  • No extra drivers needed

    The Bandwidth Monitor doesn’t install extra drivers to your computer. This will keep your system clean and reliable.

  • Small, easy to use, and accurate

    Size of Bandwidth Monitor is less than 1 MB; it has a simple interface, and uses very low CPU and memory resources.

    Bandwidth Monitor Key Features:

    • Network bandwidth monitoring
    • Internet and broadband bandwidth monitoring
    • Real-time graphical and numerical bandwidth speed displaying. It’s a ideal software for broadband speed test, internet speed test, adsl speed test, and bandwidth speed test.
    • Monitor multiple network connections at a time
    • Support running as a system service that monitors bandwidth usages and generate traffic reports automatically
    • Speed rates scale
    • Works with majority network connections including modem, ISDN, DSL, ADSL, cable modem, wireless network cards, Ethernet cards, VPN, and more
    • Scalable to your own modem download capabilities
    • Provides daily, weekly, monthly and summary bandwidth usage reports, plus exports to a plain text, HTML, or Microsoft Excel .csv file
    • Readout in either KB/sec (kilobytes per second) or >kbps (kilobits per second)
    • Bandwidth usage notification (notify user by playing sound, computer beep, sending email, running a program)
    • Download and upload speeds stopwatch
    • Customize colors and fonts
    • Show real-time network traffic graph in system tray
    • Show time in traffic graph
    • Show traffic graph in line or column style; and column width and space can be customized
    • Show average download and upload lines in traffic graph
    • Includes complete window configuration and view options
    • Requires minimal system resources
    • Full compatible with Windows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 7, Windows 8, and Windows 10

    Bandwidth Monitor Quick Info:

    • Version: 3.4 build 757
    • Size: 1.16 MB
    • License: Free to try
    • Platforms: Windows 10 / 8 / 7 / Vista / 2008 / 2003 / XP / 2000 / NT / Me / 98 (both 32-bit and 64-bit editions)
    • Limitations: 30-day trial with full features

    Network monitor Free Download Bandwidth Monitor


    21/09/2017

    Posted In: NEWS

    Tags: ,

    Leave a Comment

  • Monitor Staff Productivity – Attendance with FlexiServer #attendance #management,attendance #software,attendance #system,attendance


    #

    FlexiServer Productivity Attendance Software

    Track Employee Attendance and Computer Use

    FlexiServer tracks staff hours and computer activity making tracking hours, vacation time and sick leave easier for employees and HR alike. It also has computer usage monitoring for quality control, security or legal compliance.

    • Track staff check in times and working hours
    • Know what your staff is working on
    • Create a flexible working environment
    • View reports for each employee

    FlexiServer tracking hours and attendance of staff across an company. For freelancers and professionals looking to track time for easier hourly billing consider HourGuard time recording software .

    Download Now Purchase Online

    Track Employee Hours and Attendance

    FlexiServer is software for automatic employee time attendance logging. It also features additional tools for quality assurance monitoring and reporting, and works with home or remote employees.

    Create a Flexible Working Environment

    With FlexiServer you can track and monitor employee hours from a remote location. Simply have work-at-home staff or other remote employees install FlexiStation to monitor the hours put in away from the office.

    Improve Productivity and Efficiency

    Improve the way your business operates by using reports for job-costing. Know exactly what tasks your staff is working on and which are taking the most time. See what percentages of a staff member’s time are spent in each application.

    Know What Staff Members Are Working On

    FlexiServer gives managers the confidence they need to know that things are getting done without needing to micro-manage. Monitoring is non-invasive and respects the employees’ need for privacy, allowing them to enter private mode when necessary, while creating a paper trail that can be referenced should there be need.

    Additional Workplace Benefits

    • Employees don’t need to fill out time sheets to record their hours
    • Human Resources and managers have 24/7 access to hours and reports
    • Management can easily monitor outsourced, contract or remote employees
    • Employees can work more flexible hours, working when and where they want
    • Prevent computer or misuse such as viewing pornography or illegal downloads

    Management Software

    Related Software

    Staff Management Features

    • Log employee time attendance automatically
    • Detect breaks and idle time automatically
    • Alternatively enter hours manually through a web form
    • Private mode available to employees for privacy on breaks or when completing personal tasks
    • Takes screenshots at regular intervals
    • Logs count of keystrokes and mouse clicks*
    • Link hours and attendance information to payroll software
    • Shows the online status of all team members
    • Real time screen monitoring available for Quality Assurance
    • Email monitoring can store all emails sent by employees
    • Generate reports on employee application and document usage
    • No extra hardware or dedicated server is required, FlexiServer can run on an HR or manager’s computer
    • Works behind fire walls and routers
    • Can be used over the internet or on a local network

    * FlexiServer does not collect data on the content of keystrokes or mouse clicks.

    How It Works

    The manager or bookkeeper runs FlexiServer on their computer. Whenever the manager or bookkeeper wants to view reports they can log onto FlexiServer with their web browser and use the control panel.

    All staff then run FlexiStation on their computers. FlexiStation runs in the background logging hours worked. Workstations will monitor hours even if the FlexiServer computer is offline, all the cached data will be sent to FlexiServer when it comes back online. FlexiStation provides employees a subset of features so they can manually enter hours, view individual reports or request time-off.

    System Requirements

    FlexiServer – For the Main Computer

    FlexiStation – For Each Employee Workstation

    • Windows XP/Vista/7/8/8.1/10
    • Works on 64 bit Windows

    This can be a manager’s computer. No dedicated server is required.

    • Windows XP/Vista/7/8/8.1/10
    • Works on 64 bit Windows
    • See Win 98 and Win 2000 to download software compatible with earlier versions of Windows.
    • Mac OS X 10.6 or above

    Download FlexiServer for Main HR Computer

    Download FlexiStation for Employee Workstations

    More Information.


    19/09/2017

    Posted In: NEWS

    Tags: , , , , , , , , , , , , , , , ,

    Leave a Comment

    Linfo – Shows Linux Server Health Status in Real-Time #check #linux


    #

    Linfo Shows Linux Server Health Status in Real-Time

    Linfo is a free and open source, cross-platform server statistics UI/library which displays a great deal of system information. It is extensible, easy-to-use (via composer) PHP5 library to get extensive system statistics programmatically from your PHP application. It’s a Ncurses CLI view of Web UI, which works in Linux, Windows, *BSD, Darwin/Mac OSX, Solaris, and Minix.

    It displays system info including CPU type/speed ; architecture, mount point usage, hard/optical/flash drives, hardware devices, network devices and stats, uptime/date booted, hostname, memory usage (RAM and swap, if possible), temperatures/voltages/fan speeds and RAID arrays.

    Requirements:

    • PHP 5.3
    • pcre extension
    • Linux /proc and /sys mounted and readable by PHP and Tested with the 2.6.x/3.x kernels

    How to Install Linfo Server Stats UI/library in Linux

    First, create a Linfo directory in your Apache or Nginx web root directory, then clone and move repository files into /var/www/html/linfo using the rsync command as shown below:

    Then rename sample.config.inc.php to config.inc.php. This is the Linfo config file, you can define your own values in it:

    Now open the URL http://SERVER_IP/linfo in web browser to see the Web UI as shown in the screenshots below.

    This screenshot shows the Linfo Web UI displaying core system info, hardware components, RAM stats, network devices, drives and file system mount points.

    Linux Server Health Information

    You can add the line below in the config file config.inc.php to yield useful error messages for troubleshooting purposes:

    Running Linfo in Ncurses Mode

    Linfo has a simple ncurses-based interface, which rely on php s ncurses extension.

    Now compile the php extension as follows

    Next, if you successfully compiled and installed the php extension, run the commands below.

    Verify the ncurses.

    Linux Server Information

    The following features yet to be added in Linfo:

    1. Support for more Unix operating systems (such as Hurd, IRIX, AIX, HP UX, etc)
    2. Support for less known operating systems: Haiku/BeOS
    3. Extra superfluous features/extensions
    4. Support for htop-like features in ncurses mode

    For more information, visit Linfo Github repository: https://github.com/jrgp/linfo

    That’s all! From now on, you can view a Linux system’s information from within a web browser using Linfo. Try it out and share with us your thoughts in the comments. Additionally, have you come across any similar useful tools/libraries? If yes, then give us some info about them as well.


    10/09/2017

    Posted In: NEWS

    Tags: , , , , , , ,

    Leave a Comment

    Performance Monitor #performance #monitor #tutorial


    #

    Performance Monitor

    By: Greg Robidoux
    Overview

    Windows Performance Monitor or PerfMon is another great tool to capture metrics for your entire server. So far we discussed DMVs and Profiler which are great tools for finding out what is occurring within your SQL Server instance, but sometimes there are issues outside of SQL Server that may be causing performance issues. In this section we will take a look at PerfMon and how this tool can be used.

    Explanation

    The Performance Monitor tool allows you to capture and graph many aspects for the Windows server. There are counters for .NET, Disks, Memory, Processors, Network, etc. as well several counters related to each instance of SQL Server on the box. If you have multiple instances running on one server, the counters are available for each instance so you can see what is occurring at the instance level.

    Launching Performance Monitor

    You can launch Performance Monitor a few different ways.

    Start Control Panel Administrative Tools Performance Monitor or you can launch PerfMon.exe. Once this is running you will get an interface like the following:

    Above is the default look and feel when you launch this tool. Here we can see there is one counter “% Processor Time ” that is being tracked. For this counter we can see the following items:

    • Last – this is the last value that was captured for this counter
    • Average – this is the average value for the duration
    • Minimum – this is the minimum value for the duration
    • Maximum – this is the maximum value for the duration
    • Duration – this is the total collection time period and in this case it is 1:40 which is 1 minute and 40 seconds

    From this we can tell when there are peaks for specific counters that may be causing performance issues.

    Adding Counters and Changing Settings

    To add a counter, right click on the big green plus button above the graph and a new window will open like the following:

    From this window we can select additional counters such as Memory, Physical Disk and SQL Server specific counters. To add a counter select the counter and click the Add button. The below screen shot shows multiple counters that have been selected. Click OK when you are done to start capturing this data.

    The other thing you will want to do is change your duration and frequency for collecting data. By default it is set to sample the data every 1 second for a duration of 100 seconds. To change this right click on the graph and select Properties and a new window like the following will appear. If you click on the General tab you can set the sampling settings as shown below. In addition there are several other properties you can modify in this window.

    Once you click OK these settings will go in to effect immediately.

    Useful Counters

    Once you start to explore all of the counters it can be overwhelming since there are so many to choose from, so here are a few counters that would make sense to begin capturing. Also, once you start collecting it is also difficult to tell if you have an issue or not based on the values that are returned. Since there are no hard and fast rules for all counters the best approach is to capture these values when your system is running fine, so you can create a baseline. Then you can use these baseline numbers when you start to capture data. You can find some information online about specific counters and threshold values for each counter.

    • Memory
      • Available MBytes
    • Physical Disk
      • Avg. Disk sec/Read
      • Avg. Disk sec/Write
    • Processor
      • % Processor Time
    • SQL Server: Buffer Manager
      • Page Life Expectancy
      • Buffer cache hit ratio
    • SQL Server: SQL Statistics
      • Batch Requests/sec
      • Compilations/sec
    Additional Information

    Here are some additional items related to Performance Monitor.


    07/09/2017

    Posted In: NEWS

    Tags: , ,

    Leave a Comment

    Network Bandwidth Monitoring Tool #bandwidth #monitor #linux


    #

    Monitor Bandwidth

    NetFlow Analyzer has helped us reduce the time taken to isolate and contain threats like worms and virus attacks. It has also helped us to solve network incidents faster, and do better capacity planning.

    Fred Hassard, Sr. Network Engineer, Adventist Health

    Network bandwidth monitoring is one of the most critical activities of an enterprise network administrator. NetFlow Analyzer is a bandwidth monitor that provides several instant reports to monitor bandwidth including top talkers, top protocols, top conversations, and more. The reports can be exported as pdf, csv, or can even be mailed to you. Apart from these pre-defined bandwidth reports, NetFlow Analyzer bandwidth monitor also includes options to search for specific bandwidth usage details based on IP address, host name, protocol, and more.

    Threshold Based Alerting

    NetFlow Analyzer Bandwidth Monitor allows you to set thresholds for the bandwidth utilization, get alerts and emails when the threshold value is exceeded. This helps in quicker understanding of the problem in the network and hence quicker action.

    Bandwidth Monitoring without Probes

    NetFlow Analyzer does network bandwidth monitoring using NetFlow. NetFlow exports are collected, correlated, and analyzed by the bandwidth monitor to get granular details to monitor bandwidth usage across each WAN link. There is no need for hardware probes to monitor bandwidth usage. NetFlow Analyzer bandwidth monitor is an all software solution which is suitable for both Windows and Linux .

    Real-time Bandwidth Monitoring

    Bandwidth monitoring reports for each interface shows the current, average, and peak bandwidth usage patterns across each NetFlow-enabled interface. With these bandwidth usage statistics you can get instant visibility into how much bandwidth was used up by hosts, applications, and conversations across a specific interfaces. The NetFlow Analyzer is a great bandwidth monitor to get real time data about bandwidth being used.

    Historical Bandwidth Usage Trends

    The NetFlow Analyzer bandwidth monitor allows you to view the bandwidth usage over a period of time. Bandwidth monitoring trends shows the usage patterns and traffic trends across a day, week, month, and a year. With such statistics, you can analyze how bandwidth is used in your network, and decide if you need to increase available bandwidth.

    Application-wise Bandwidth Distribution

    To monitor bandwidth utilized by different applications, NetFlow Analyzer bandwidth monitor gives you instant visibility into which applications are using up maximum bandwidth. You can also drill down to see the top sources, destinations and conversations using the bandwidth. With such granular detail, network troubleshooting and problem resolution take far less time than with traditional tools.

    Consolidated Bandwidth Usage Summary

    Bandwidth Monitor’s reports summarizes the bandwidth utilized and show the overall bandwidth usage statistics for a WAN link. You can monitor bandwidth usage patterns in real time, along with details on hosts, applications, and conversations using up bandwidth for the selected time period. Options to see bandwidth usage during peak working hours is also available.

    Wishing you a happy bandwidth monitoring!

    NetFlow Analyzer is a NetFlow, sFlow, JFLow (and more ) collector and analyzing engine integrated together. NetFlow analyzer is a software (for windows and linux ), does not require any hardware probes, which can be downloaded, used in your network environment and can be evaluated for 30 days. Go through the following useful links for better understanding of how NetFlow Analyzer can help you in understanding your network traffic and bandwidth utilization .


    06/09/2017

    Posted In: NEWS

    Tags: , ,

    Leave a Comment

    What is Microsoft Windows Subsystem for Linux? Definition from #gnome #performance


    #

    Microsoft Windows Subsystem for Linux

    Microsoft Windows Subsystem for Linux is a series of Microsoft components that allow native Linux 64-bit Executable and Linkable Format (ELF64) binaries to run on the Windows kernel in the Windows 10 operating system (OS).

    Download this free guide

    Download: Buyer’s Guide to Windows Server 2016 in 2017

    You may be due for an upgrade! Check out our full Windows Server 2016 Buyer’s Guide to see if a switch to the new server would be the best move for your organization.

    By submitting your personal information, you agree that TechTarget and its partners may contact you regarding relevant content, products and special offers.

    You also agree that your personal information may be transferred and processed in the United States, and that you have read and agree to the Terms of Use and the Privacy Policy .

    After enabling the Windows Subsystem for Linux feature in Windows 10, the Linux bash can be run to install the Ubuntu user-mode image that runs on top of the Windows kernel layer that allows ELF64 binaries to operate in Windows. After installation, users can run other files from the Ubuntu package repository; Linux command-line utilities such as grep. sed, and awk; navigate the Linux file system; and execute scripts using command-line interface (CLI ) utilities.

    Windows Subsystem for Linux includes a user-mode session manager service to handle the Linux instance, minimized (Pico) processes to handle Linux system calls and Pico drivers to emulate the Linux kernel. As a whole, this architecture enables Linux system calls to be passed into and handled by the Windows kernel.

    Windows Subsystem for Linux is primarily for Linux developers operating in a Windows environment. For example, web developers often use Linux and other open-source tools but have limited access to full Linux systems for development and experimentation. Windows Subsystem for Linux lets developers use common Linux tools and advanced development languages, such as Ruby and Python, to operate through Windows.

    While Linux instances can run in Windows inside a virtual machine (VM), Windows Subsystem for Linux offers two advantages. First, it requires less overhead computing resources — processor, memory and storage — than a full VM. Second, Windows Subsystem for Linux allows both Windows and Linux environments to run simultaneously, so developers can use Windows applications and Linux utilities on the same files if needed.

    Windows Subsystem for Linux currently has several limitations. First, it does not support all Linux applications; it is intended to provide a tool to handle bash and major Linux command-line utilities. Windows Subsystem for Linux does not support Linux GUI environments such as Gnome or K Desktop Environment. Windows Subsystem for Linux only supports the Ubuntu Linux distribution at this time. In addition, Windows Subsystem for Linux is only available for Windows 10 and will not be available in Windows Server versions. While Windows Subsystem for Linux can run some Linux server applications, such as Redis as a database, it is not intended to host Linux server applications.

    Windows Subsystem for Linux employs two file systems to support Linux file conventions while providing interoperability with Windows files. A file system called VolFs supports Linux file conventions including Linux permissions, links to other files, names with characters not normally accepted under Windows and the Linux directory structure. However, VolFs does not support interoperability between its files and Windows applications, but another file system called DriveFs provides that interoperability, ensuring legal Windows file names, enforcing Windows security and supporting case-sensitive file names. The directory structure of DriveFs allows users to apply either Windows or Linux tools to files at the same time.

    This was last updated in August 2016

    Continue Reading About Microsoft Windows Subsystem for Linux

    Related Terms

    memory dump A memory dump is the process of taking all information content in RAM and writing it to a storage drive. Developers commonly use. See complete definition Microsoft Microsoft is a leading global vendor of computer software; hardware for computer, mobile and gaming systems; and cloud services. See complete definition operating system (OS) An operating system (sometimes abbreviated as “OS”) is the program that, after being initially loaded into the computer by a boot. See complete definition

    PRO+

    Content


    31/08/2017

    Posted In: NEWS

    Tags: , ,

    Leave a Comment

    IFTOP Guide: Display Network Interface Bandwidth Usage on Linux #network #usage


    #

    IFTOP Guide: Display Network Interface Bandwidth Usage on Linux

    This is a guest post written by SathiyaMoorthy.

    Monitoring your network is an easy task with iftop. It shows a table of current bandwidth usage by hosts. iftop shows the pair of hosts which is responsible for the most traffic at the top of list, which makes it easier to identify the hosts that causes network congestion.

    Iftop output shows the data transfer rate, both for data sent and received, for the past 2 seconds, 10 seconds, and 40 seconds.

    This article provides an overview of iftop, installation instructions, sample usage example and screenshots of iftop.

    Overview of IFTOP

    • iftop (interface top) derives the name from the standard unix top command. top command displays real-time CPU Usage. iftop command displays real-time network bandwidth usage.
    • iftop displays the network usage of a specific interface on the host.
    • Using iftop you can identify which host is responsible for slowing down your network.
    • To find out which process is causing the problem, note down the port number from the iftop and use netstat -p to identify the process.
    • iftop monitors your network activity, and displays a table of current bandwidth.

    Download iftop

    Download the source code form the iftop website .

    Install iftop

    Note: If you get can t find pcap.h or ncurses mvchgat error message, please see the troubleshooting section below on how to fix that issue.

    If you prefer to install it from binaries, please visit the iftop website to download the binaries.

    iftop Usage

    The default iftop command displays the bandwidth usage of the first ethernet device.

    You can also specify a particular interface with the -i option as shown below.

    While iftop is running, you can press any one of the following keys to display more output.

    If you execute iftop from a non-root account, you will get the following error message.

    iftop configuration files

    /.iftoprc is the default configuration file for the iftop. The format of that file is name: value.

    If you set the port-display on as shown below, iftop command will display the ports by default.

    iftop Screenshots

    Fig. Screenshot of iftop

    Troubleshooting iftop Issues

    Issue 1: While installing iftop from source, executing ./configure gives the following pcap.ph error message.

    Solution 1: Make sure libpcap and libpcap-devel is installed. If not, install it as shown below.

    Issue 2: While installing iftop from source, executing ./configure gives the following ncurses/mvchgat error message.

    Solution 2: Make sure ncurses and ncurses-devel is installed. If not, install it as shown below.

    This article was written by SathiyaMoorthy, developer of EPQA. Sathiya got impressed by the 15 Examples To Master Linux Command Line History article on this blog and became a regular reader and contributor. The Geek Stuff welcomes your tips and guest articles .

    Advice me how to use this tool without root correctly. thanks

    Reminds me of my first software job (1995) where we had to write a little tool on a Sun SPARC (I guess) using TCL/TK to monitor network traffic, resource utilization on the hubs. After that I never touched Unix for almost 13 years.

    (I get scared looking at the screen dump but I know that it s a monster underneath that)

    Ramesh January 2, 2009, 8:34 pm

    iftop needs root access. Probably you can use sudo from your account to execute iftop.

    it s time for you to get back to Linux. . Find an old laptop/PC and install Ubuntu on it to get it started. For you it should be very easy as you ve used Unix earlier.

    Thank you for this introduction to iftop. Unfortunately, there are several options that are listed in help screen that I can t find any description; and you don t cover them either. Namely, f edit filter code and l set screen filter in the end, I figured `l option).

    Also, I ve been trying to figure out if it s possible to wrap the names of source hosts. Especially, when each connection takes two lines, it is unfortunate that long host names are truncated and the second line is wasted

    d54C165C0.access.telenet. = win2008.lan 0b 105b 26b
    = 0b 244b 61b

    Last, it would be nice to list iftoprc names they are not too obvious.

    ndr June 3, 2009, 2:16 am

    i am using Clarkconnect 4.3 enterprise edition have problem to install iftop. I cannot install/update ncurses and ncurses-devel. any idea how to update/install this

    Ramesh Natarajan June 4, 2009, 12:39 am

    ndr June 4, 2009, 2:06 am

    just apt-get install ncurses-devel and success now. but this morning try to run iftop and got error message like cannot load shared library cap. try another command like ping , ll was give message unknown command..and try to restart and my server give message kernel panic

    If we found the kernel panic what we can do..just reinstall the sistem or what..
    thanks for your reply.

    Hi,
    Is there any possibility to use output of iftop and somehow feed it to webpage?

    afrodeity June 22, 2010, 3:14 pm

    I started iftop and see a lot of weird ip addresses and urls doing things. What is going on? Where are these services going? Is there a way to find out what is going on?

    Pachantoms February 28, 2012, 10:20 pm

    Hi,
    How to run iftop command only once and come out of the process.


    29/08/2017

    Posted In: NEWS

    Tags: , , ,

    Leave a Comment

    Index of #ubuntu #server #monitor


    #

    Ubuntu 15.04 (Vivid Vervet)

    Select an image

    Ubuntu is distributed on two types of images described below.

    Desktop image

    The desktop image allows you to try Ubuntu without changing your computer at all, and at your option to install it permanently later. This type of image is what most people will want to use. You will need at least 384MiB of RAM to install from this image.

    There are two images available, each for a different type of computer:

    64-bit PC (AMD64) desktop image Choose this to take full advantage of computers based on the AMD64 or EM64T architecture (e.g. Athlon64, Opteron, EM64T Xeon, Core 2). If you have a non-64-bit processor made by AMD, or if you need full support for 32-bit code, use the i386 images instead. 32-bit PC (i386) desktop image For almost all PCs. This includes most machines with Intel/AMD/etc type processors and almost all computers that run Microsoft Windows, as well as newer Apple Macintosh systems based on Intel processors. Choose this if you are at all unsure.

    Server install image

    The server install image allows you to install Ubuntu permanently on a computer for use as a server. It will not install a graphical user interface.

    There are two images available, each for a different type of computer:

    64-bit PC (AMD64) server install image Choose this to take full advantage of computers based on the AMD64 or EM64T architecture (e.g. Athlon64, Opteron, EM64T Xeon, Core 2). If you have a non-64-bit processor made by AMD, or if you need full support for 32-bit code, use the i386 images instead. 32-bit PC (i386) server install image For almost all PCs. This includes most machines with Intel/AMD/etc type processors and almost all computers that run Microsoft Windows, as well as newer Apple Macintosh systems based on Intel processors. Choose this if you are at all unsure.

    snappy Ubuntu Core images

    The snappy Ubuntu Core image allows you to install Ubuntu permanently on a computer, using the snappy transactional update system.

    There are two images available, each for a different type of computer:

    64-bit PC (AMD64) snappy image Choose this to take full advantage of computers based on the AMD64 or EM64T architecture (e.g. Athlon64, Opteron, EM64T Xeon, Core 2). If you have a non-64-bit processor made by AMD, or if you need full support for 32-bit code, use the Intel x86 images instead. ARMhf BeagleBone Black snappy image For BeagleBone Black boards.

    A full list of available files, including BitTorrent files, can be found below.

    If you need help burning these images to disk, see the Image Burning Guide .


    28/08/2017

    Posted In: NEWS

    Tags: , ,

    Leave a Comment

    SteelCentral AppResponse #vdi, #unified #communications #applications, #network #performance #monitoring, #network #performance


    #

    STEELCENTRAL APPRESPONSE

    We went from being virtually blind to having a hawk’s-eye view of the network; able to see the whole picture yet capable of zeroing in immediately on details for trouble-shooting, capacity analysis, and planning. – Jean-Francois Bustarret, senior network architect, e-TF1

    What is SteelCentral AppResponse?

    Riverbed AppResponse joins together advanced application and transaction insight, comprehensive end-user experience monitoring, and deep network intelligence into a single appliance to provide total visibility into your application performance problems. It helps you discover where and when bottlenecks are occurring so that you can troubleshoot problems faster, and it streamlines workflows and reporting to enable cross-team collaboration to put an end to finger pointing.

    Using high-speed packet acquisition and multi-stage analytic processing, AppResponse delivers rich network and application insights for traditional and web applications, VoIP and video quality monitoring, database performance analysis, and Citrix-delivered apps.

    Features and benefits of SteelCentral AppResponse

    “The users are happier now, so the IT staff doesn’t have to crawl under the floorboards when they go for coffee.” – Peter Toft, IT Department Manager, Icopal

    Even split seconds of slow page times can have a huge impact on the revenue for an enterprise. When you have thousands of users per hour accessing your applications through web pages, you need to quickly answer:

    • What pages were slow?
    • When they were slow?
    • For whom they were slow?

    AppResponse pinpoints mission-critical web application problems quickly, letting you resolve them before end users even notice.

    Identify the root-cause of application performance problems faster with SteelCentral AppResponse

    With SteelCentral AppResponse you will quickly see if a performance problem is rooted in the network orservers. View response time for all users and transactions by application, user business group, and location. Understand end-user experience for both SteelHead-optimized and non-optimized web and SaaS applications.

    “As the global network manager, I didn’t want to spend my time analyzing network traffic; [SteelCentral AppResponse] does the work for us and puts our team at ease so we can focus on planning strategic IT projects that impact our business.” – Global Network Manager. Coty, Inc.

    “I was skeptical at first, but I have to say that the [SteelCentral AppResponse] box definitely ‘does what it says on the tin’. Its ability to quickly drill down to the cause of performance issues, its amazing ease of use, and the clarity of its presentation of so many useful metrics, have made it our primary tool for application performance management.” – UK Network Manager, IT Centre UK. ALSTOM

    The [SteelCentral AppResponse] solution has given us a scientific approach to managing the site, making the hard data we need easily available for analysis and thus enabling us to forecast, act, and react much more appropriately. And now, when my boss comes down and asks me ‘what’s up with the network’, I can give him a complete answer—in terms of the impact
    on our business—in ten minutes or less.”
    Senior Network Engineer. Hotwire.com

    [SteelCentral AppResponse] saves us more time than any other management tool we use. It’s like having another person on staff.” – Senior Network and Systems Analyst, Colgate University

    AppResponse ROI Calculator shows you how you can reduce costs of delivering applications to users.

    SteelCentral AppResponse integrates application and network performance management to deliver:

    • Deep packet inspection and application recognition
    • End-user experience monitoring for web applications at the user transaction level
    • End-user experience monitoring of SteelHead optimized SaaS and on-premise web applications
    • Response time decomposition
    • Database transaction analysis
    • Per-user Citrix XenApp transaction analysis
    • Continuous VoIP and video monitoring
    • Rich network intelligence

    Supported Network Packet Brokers:


    AppResponse monitors end-user experience for SteelHead-optimized enterprise web and SaaS applications and helps you understand the benefit of SteelHead WAN optimization in terms of the effect on end user experience.

    Compatible Riverbed solutions to solve application performance issues

    • When SteelCentral AppResponse reports which server is causing the delay, deploy SteelCentral AppInternals to conduct a full code-levelapplication diagnosis.
    • If the network seems to be the issue, SteelCentral NetSensor displays performance data all along the layer 2/3-network path.
    • Seamlessly drill into SteelCentral Transaction Analyzer for in-depth analysis of individual multi-tier transactions.
    • AppResponse leverages Riverbed SteelHead appliances in the branch, data center and cloud to provide visibility into end-user experience for optimized enterprise web and SaaS applications.

    Citrix Monitoring for SteelCentral AppResponse

    Citrix offers significant benefits to IT organizations. But, due to its unique architecture, the lack of a complete view of user transactions can sometimes complicate the performance-troubleshooting process. The CX-Tracer module uses industry-leading analytics in SteelCentral AppResponse to pinpoint the root cause of performance problems for Citrix-hosted applications.

    CX-Tracer automatically correlates front-end user sessions to their back-end counterparts, enabling end-to-end analysis of individual Citrix user sessions. Additionally, CX-Tracer complements and extends your existing Citrix monitoring solutions such as Citrix EdgeSight.

    Database Performance Monitoring for SteelCentral AppResponse

    With the Database Performance module you can identify the impact of a database on end-to-end application performance. By monitoring database performance at the transaction level, the module can identify the particular SQL statement or database call responsible for application delay and equip your database team with actionable information.

    Because it uses passive monitoring for zero overhead on database operations, no database logging is required. You get a unified view of the end-user experience and database performance, to complement and extend your investment in database-health monitoring tools.

    Unified Communications Monitoring for SteelCentral AppResponse

    With the Unified Communications module you can monitor and report on live VoIP and video calls. Manage voice, video, and data on the same network, and proactively resolve communication issues by using real-time and historical data on both application performance and call quality.

    With passive speech-quality analysis, you can monitor call quality and resolve issues before they affect end-users. Prioritize problem resolution and set meaningful SLAs based on the effect of call quality on various areas of your business, and then easily troubleshoot with real-time, web-based dashboards for speedy resolution.

    Shark module for SteelCentral AppResponse

    Add Shark module to your SteelCentral™ AppResponse license to create a single appliance that provides rich network intelligence, end user experience monitoring and transaction analysis. Accelerate problem resolution with streamlined workflows and deeper network insight, letting you get to the right level of information needed to solve problems quickly and easily.

    Global Selector


    24/08/2017

    Posted In: NEWS

    Tags: , , , , , , , , , , , , , , , , , , , , , , ,

    Leave a Comment

    How do I: Monitor a service and automatically restart it if


    #

    How do I: Monitor a service and automatically restart it if it stops (SCOM 2012)

    1. Go to Authoring Management Pack Objects Monitors

    2. Right Click Monitors Create Monitor Unit Monitor

    3. As always do no save anything to the Default Management Pack, if you have a custom management pack where you want to save the monitor if now click New

    4. Name your Management Pack Next

    6. Windows Services Basic Service Monitor Next

    7. a. Name your Monitor (I recommend the naming convention: unique prefix which should be a part of every custom rule/monitor/group-Servername-ServiceName)

    b. Select a Monitor Target (Monitor Target Scope must apply to the server that contains the service you want to monitor. If you target Server 2003 and the Server that contains the service you want to monitor is Server 2008 you monitor won t work)

    c. Uncheck Monitor is enabled (You do not want to leave the this checked. If you do SCOM will try to monitor for this service on all Servers based on the monitor target even if they don t contain the service you are trying to monitor. You will narrow the scope further and enable the monitor via an override once you are finished building it.)

    8. If you know the name the of the Service you can just type it in, but I recommend clicking the selection button to point the monitor to the exact name of the service you want to monitor to avoid troubleshooting later on.

    9. By default it will pull the available services from the management server you are running the console to see services from a different server click the button and browse to your desired server.

    10. For this example I am selecting the WMI Winmgmt service

    12. Generate alerts for this monitor Automatically resolve the alert when the monitor returns to a healthy state Create

    13. Find your newly created monitor by searching for your custom prefix: ops-

    14. Right click your new monitor Overrides Overide the Monitor For a specific object of class: Windows Server 2008 R2 Full Operating System

    15. Select the specific server that you want to monitor:

    16. Enabled Override Value True (This will activate this service monitor for the associated server) Apply Show Monitor Properties

    17. Configure recovery tasks Add

    18. Add Recovery for critical health state

    21. Name Recovery Run recovery automatically Recalculate monitor state after recovery finished

    22. Enter the following items Parameter will vary based on the name of the service you are trying to recover automatically.

    23. Once your Override and recovery are in place schedule a time when it is ok to stop the service you are trying to monitor/recover so that you can observe the behavior to insure you made no errors as well as to see if you want to tweak the timeout.

    Leave a Reply Cancel reply


    23/08/2017

    Posted In: NEWS

    Tags: , , ,

    Leave a Comment

    Nested ESXi Enhancements in vSphere 6 #vsphere #mini #monitor


    #

    As many of you have probably heard by now, vSphere 6.5 was just announced at VMworld Barcelona this week and it is packed with a ton of new features and capabilities which you can read more about here. One area that is near and dear to me and has not been covered are some of the Nested ESXi enhancements that have been made in vSphere 6.5.

    To be clear, VMware has NOT changed its support stance in vSphere 6.5. Both Nested ESXi as well as general Nested Virtualization is still NOT officially supported. Okay, so thats out of the way now, lets see what is new?

    • Paravirtual SCSI (PVSCSI) support
    • GuestOS Customization
    • Pre-vSphere 6.5 enablement on vSphere 6.0 Update 2
    • Virtual NVMe support

    Lets take a closer look at each of these enhancements.

    Paravirtual SCSI (PVSCSI) support

    When vSphere 6.0 Update 2 was released, I had hinted that PVSCSI support might be a possibility in the near future. I am happy to announce that this is now possible with running Nested ESXi and having the guestOS as ESXi 6.5. In vSphere 6.5, a new GuestOS type has been introduced called vmkernel65 which is optimized for running ESXi 6.5 in a VM as shown in the screenshot below.


    As you can see from the VM Virtual Hardware configuration screen below, both the PVSCSI and VMXNET3 adapter are now the recommended default when creating a Nested ESXi VM for running ESXi 6.5.


    Similiar to the VMXNET3 driver, the PVSCSI driver is automatically bundled within the version of VMware Tools for Nested ESXi. That is to say, the drivers are included in the default ESXi image itself and is ONLY activated when ESXi detects that it is running inside of a VM. From a user standpoint, this means there are no additional configurations or installations that is required. You simply select ESXi 6.5 as the GuestOS and install ESXi as you normally would and this will automatically be enabled for you.

    The only requirement to leverage this new capability is that BOTH the GuestOS type is ESXi 6.5 (vmkernel65) and the actual OS is running ESXi 6.5. The underlying physical ESXi host can either be ESXi 6.0 or ESXi 6.5. In addition to new virtual hardware defaults, I have also found that the new ESXi 6.5 GuestOS type now uses EFI firmware over the legacy BIOS compared to previous ESXi 6.x/5.x/4.x GuestOS types.

    For customers who wish to push their storage IO a bit more for Nested ESXi guests, this is a great addition, especially with lower overhead when using a PVSCSI adapter.

    GuestOS Customization

    One of the very last capability that has been missing from Nested ESXi is the ability to perform a simple GuestOS customization when cloning or deploying a VM from template running Nested ESXi. Today, you can deploy my Nested ESXi Virtual Appliance which basically provides you with the ability to customize your deployment but would it not be great if this was native in the platform? Well, I am pleased to say this is now possible!

    When you go and clone or deploy a VM from template that is a Nested ESXi VM, you will now have the option to select the Customize guest OS option. As you can see from the screenshot below, you can now create a new Customization Spec which is based on the Linux customization spec. The customization only covers networking configuration (IP Address, Netmask, Gateway and Hostname) and only applies it to the first VMkernel interface, all others will be ignored. The thinking here is that once you have your Nested ESXi VM on the network, you can then fully manage and configure it using the vSphere API rather than re-creating the same functionality just for cloning.

    • Perform two configuration changes within the Nested ESXi VM which will prepare them for cloning. You can find the configuration changes described in my blog post here
    • Ensure BOTH the GuestOS type is ESXi 6.5 (vmkernel65) and the actual OS is running ESXi 6.5. This means that your underlying physical vSphere infrastructure can be running either vSphere 6.0 Update 2 or vSphere 6.5

    You can monitor the progress of the guest customization by going to the VM s Monitor- Tasks Events using the vSphere Web Client or vSphere API if you are doing this programmatically. Below is a screenshot of a successful Nested ESXi guest customization. If there are any errors, you can take a look at /var/log/vmware-imc/toolsDeployPkg.log within the cloned Nested ESXi VM to determine what went wrong.


    I know this will be a very welcome capability for customers who extensively use the guest customization feature or if you just want to quickly clone an existing Nested ESXi VM that you have already configured.

    Pre-vSphere 6.5 enablement in vSphere 6.0 Update 2

    By now, you probably have figured out what this last enhancement is all about It is exactly as it sounds, we are enabling customers to try out ESXi 6.5 by running it as a Nested ESXi VM on your existing vSphere 6.0 environment and specifically the Update 2 release (this includes both vCenter Server as well as ESXi). Although this has always been possible with past releases of vSphere running newer versions, we are now pre-enabling ESXi 6.5 specific Nested ESXi capabilities in the latest release of vSphere 6.0 Update 2. This means when vSphere 6.5 is generally available, you will be able to test drive some of the new Nested ESXi 6.5 capabilities that I had mentioned on your existing vSphere infrastructure. This is pretty darn cool if you ask me!?

    Virtual NVMe support

    I had a few folks ask on whether the upcoming Virtual NVMe capability in vSphere 6.5 would be possible with Nested ESXi and the answer is yes. Please have a look at this post here for more details.

    For those of you who use Nested ESXi, hopefully you will enjoy these new updates! As always, if you have any feedback or requests, feel free to leave them on my blog and I will be sure to share it with the Engineering team and who knows, it might show up in the future just like some of these updates which have been requested from customers in the past

    More from my site


    15/08/2017

    Posted In: NEWS

    Tags: , ,

    Leave a Comment

    Database Health Monitor #server #monitor #software


    #

    Does Your SQL Server Have Performance Issues?

    Find out with the database health monitor

    Database Health Monitor is a powerful performance monitoring and diagnostics solution that shows administrators server health, performance or availability problems within their SQL Server environment, all from a central console.

    Helping Administrators Perform Monitoring Faster

    From the historic wait stats monitoring the instance level reports that give a quick overview of your SQL Server, the Database Health Monitor helps you monitor and quickly understand the health of your database. The performance monitoring is built for people with one or hundreds of SQL Servers to quickly check on the status, find problems, and to remedy those problems.

    Save time database tuning with the Database Health Reports

    The Database Health Monitor is a free tool for you to use to monitor your SQL Server environments. There is no limit to the number of servers you can monitor. Download Now

    What s in the tool?

    Database Health Monitor is a tool built by Steve Stedman of SQL Data Partners to help SQL Server administrators find the performance issues or bottlenecks on SQL Server. The tool started as a way to help gather metrics for our own environments in 2010 and we have added to it and ensure it continues to work in the latest versions of SQL Server. The tool is now available for free.

    We know you will benefit from using this tool to monitor your environments. It this works for you and helps, great! If you would be so kind and tell others about, you have our thanks.

    Download Database Health Monitor and do all your own performance monitoring.
    Download for free now…

    If you need help, we offer a performance evaluation to review the results of the Database Health Monitor. The review process can be as simple as a few hours or we can dig in and provide database tuning for your system. If you think you want to work with us, simply schedule a short meeting normally 30 minutes, to review what you have in mind.

    Database Health Version 2.5.4


    14/08/2017

    Posted In: NEWS

    Tags: , ,

    Leave a Comment

    Monitor Network Speed and Uptime with a Server Uptime Monitor #server


    #

    Server Uptime Monitor

    sMonitor is a server uptime monitor for your business. Since many businesses these days offer services based on application services to their customers, it is extremely important that network administrators know that all of their essential servers are up and running. sMonitor will inform you of this. sMonitor runs as a standard Windows application or as a Windows service. Since it can run as a Windows service, it can also run in the background even if no one is logged into the computer. It monitors all network servers and informs network administrators by using either an SMTP email service or a GSM SMS messaging service if a server comes online, goes offline or has its running state modified in any other way. This way, network administrators will always know about the online status of their servers in minimal time.

    The main sMonitor window, whether being displayed on not, is mirrored by a constantly updated HTML file which keeps a log of all monitored activity. This file is fully customizable from within the program and it may be uploaded to any remote Web server that uses the FTP protocol. A built-in script interpreter interacts with remote systems using either a modem or the telnet service to launch third-party software.

    Additional features of sMonitor include its support for ICMP, UDP and TCP protocols. It can also send protocol-specific UDP requests to ports 67 (DHCP), 123 (NTP), 137 (NETBIOS-NS), 161 (SNMP) and 389 (LDAP). sMonitor can also provide alerts of a server’s uptime status by way of alarms, both audible and visible. Network administrators can receive customized email messages from the software. sMonitor also creates log files in the plain text format and the universally supported CSV (Comma Separated Values) format. Files are sorted by servers and services. More advanced users may also create custom scripts and debug them as required. The server uptime monitor provides a wealth of unique features making it one of the top-end solutions of its kind. It has many more features and a wide selection of different notification features when compared to similar programs.

    The standard method of checking a server’s uptime using the Windows operating system is simply a matter of using the ping command. However, this is extremely limited and offers absolutely no logging or automated functionality, making it useful only in very specific purposes. When you need to monitor the uptime of one or more servers constantly, sMonitor presents an essential solution that every network administrator will find use for. Another standard solution is the PortQry utility available from Microsoft. It offers more sophisticated functionality than the ping command, but it is still limited and there is no user-friendly GUI provided since it is simply a command line utility. Neither of these solutions provide any functionality to automatically alert the user as to the uptime status of a server, however.

    You can learn more about this server uptime monitor at http://www.yarovy.com/smonitor. A list of features is available here along with screenshots of the working software.

    • Runs as a standard application or a Windows service.
    • Runs as a system tray application automatically on startup.
    • Supports ICMP, TCP and UDP.
    • Sends protocol-specific UDP requests to the ports: 67 (DHCP), 123 (NTP), 137 (NETBIOS-NS), 161 (SNMP), 389 (LDAP).
    • Allows server lists to be saved and opened as user specified files.
    • Alerts by audible and visible alarms.
    • Allows SMTP (SSL) mail and SMS notifications when a service is down, up, or its state is changed.
    • Allows custom e-mail and SMS message format to be created.
    • Launches third-party applications.
    • Creates an HTML status file which mirrors the main sMonitor window.
    • Allows the HTML file to be customized and to be uploaded by FTP to a remote web server.
    • Contains a built-in script interpreter which interacts with remote systems by modem and telnet.
    • Allows customs scripts to be created and debugged.
    • Generates plain text log files and CSV format files sorted by servers and services.

    Are you in need of a tool that can constantly verify your network connectivity? Try sMonitor. It is a dependable application that periodically checks your TCP and UDP ports. This smart piece of software can be incredibly useful so why not try it right now?


    14/08/2017

    Posted In: NEWS

    Tags: , , , , , , , , , , , ,

    Leave a Comment

    Microsoft Exchange Server Analyzer #monitor #exchange #server


    #

    This documentation is archived and is not being maintained.

    Microsoft Exchange Server Analyzer – Articles

    [This topic is intended to address a specific issue called out by the Exchange Server Analyzer Tool. You should apply it only to systems that have had the Exchange Server Analyzer Tool run against them and are experiencing that specific issue. The Exchange Server Analyzer Tool, available as a free download, remotely collects configuration data from each server in the topology and automatically analyzes the data. The resulting report details important configuration issues, potential problems, and nondefault product settings. By following these recommendations, you can achieve better performance, scalability, reliability, and uptime. For more information about the tool or to download the latest versions, see “Microsoft Exchange Analyzers” at http://go.microsoft.com/fwlink/?linkid=34707 .]

    The articles in this section correspond to the rules and resulting messages that are generated by the following Microsoft® Exchange Analyzers:

    Exchange Best Practices Analyzer

    Exchange Troubleshooting Assistant

    The Exchange Troubleshooting Assistant provides access to the following functionalities:

    Exchange Performance Troubleshooter

    Exchange Database Troubleshooter

    Exchange Database Recovery Management

    Exchange Mail Flow Troubleshooter

    Each article describes a single error, warning, or non-default configuration message that could be detected by the Exchange Server Analyzer.

    The Microsoft Exchange Analyzers Web page at http://go.microsoft.com/fwlink/?linkid=34707 contains downloads for the current versions of Exchange Best Practice Analyzer and Exchange Troubleshooting Assistant. In addition, the page contains information about system requirements, and a link to a newsgroup for discussion about the analyzers.

    If you are running in an environment where you cannot use the automatic updating facility for Exchange Best Practices, you can access the Microsoft Exchange Best Practices Analyzer Web Update Pack Web page at http://go.microsoft.com/fwlink/?linkid=34290. Here you will be able to download the most recent configuration and Help files.

    If updates are being applied automatically, you do not have to use this download.


    10/08/2017

    Posted In: NEWS

    Tags: , ,

    Leave a Comment

    Event Log Message Files (The description for Event ID – cannot


    #

    Event Log Message Files (The description for Event ID cannot be found)

    Anybody who has used the built-in event viewer that comes with Windows more than once, has probably seen the message The description for Event ID ( 50 ) in Source ( SomeService ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. when viewing certain events. This message occurs more often when viewing events on a remote event log, but it appears often enough on the local machine as well.

    I will explain this dubious error message here, but before I do I will explain how messages are in fact logged to the event log. After reading this you should have a much clearer picture about how applications log to the event log and how you go about troubleshooting this error .

    The framework that Microsoft created for the event log, back in the NT 3.51 days, was actually quite sophisticated in many ways especially when compared with the more simplistic Syslog capabilities (though Syslog still has some unique features).

    A key feature of event logging in Windows is the fact that an application, at least when using the event log framework in the way it was intended to be used, will never actually directly write the actual message to the event log instead it will log only the event source and event id, along with some properties such as category and insertion strings. The framework also supports multiple languages, so if you open an event on a French Windows, then the event will display in French (of course assuming that the message file from the vendor supports that) instead of English.

    Let s look at an example using EventSentry to understand this better. When EventSentry detects a service status change, it will log the event 11000 to the event log that reads something like this:

    The service Print Spooler (Spooler) changed its status from RUNNING to STOPPED.

    When EventSentry logs this event to the event log, you would expect that the application does (in a simplified manner) something like this:

    LogToEventLog( EventSentry ,
    101000, The service Print Spooler (Spooler) changed its status from RUNNING to
    STOPPED. );

    However, this is NOT the case. The application logging to the event log never actually logs the message to the event log, instead the application would log something similar to this:

    LogToEventLog( EventSentry ,
    101000, RUNNING , STOPPED );

    (Note that the above example is for illustration purposes only, the actual code is somewhat more complicated)

    So, our actual string from the event message is nowhere to be found, and that s because the string is embedded in what is referred to as the Event Message File . The event message file contains a list of all events that an application could potentially log to the event log. Here is what an event message file looks like before it is compiled:

    MessageId=10100
    SymbolicName=EVENTSENTRY_SVC_STATUSCHANGE
    Language=English
    The status for service %1 (%2) changed from %3 to %4.
    .
    Language=German
    Der Dienststatus von Dienst %1 (%2) aenderte sich von %3 auf %4.
    .

    Notice the numbers contained in the string that start with the percentage sign. These are placeholders for so-called insertion strings. and they make it possible to make the event log message dynamic, since an application developer can t possible account for all imaginable error message or information that might be accumulated during the runtime of the application. For example, an application might log the name of a file that is being monitored to the event log, clearly this can t be embedded into the event message file.

    Instead, the application can insert strings (hence, insertion strings) into the event message during run time. Those strings are then stored in the actual event log, along with all the other static properties of event, such as the event id and the event source.

    Event message files are usually DLL files, but event resources can also be embedded in executables as is the case in EventSentry. where all events are contained in the eventsentry_svc.exe file. This is generally a good idea, since it reduces the number of files that have to be shipped with the software and it also prevents you from losing the message DLL.

    You can browse through all embedded events in a message file by using the event message browser that is included in the free EventSentry SysAdmin Tools which you can download here. Simply launch the application, select an event log (e.g. Application), select an event source (e.g. EventSentry), and browse through all the registered event messages, sorted by the ID.

    So now that we know how Windows handles event messages internally, we can go back to the original problem: The description for Event ID ( 50 ) in Source ( SomeService ) cannot be found. . The Windows Event Viewer logs this message for one of the following reasons:

    * No message file is registered for the source (e.g. SomeService)
    * The registered message file does not exist or cannot be accessed
    * The specified event id is not included in the message file

    If the message file is not registered, then this is probably because the application wasn t installed correctly, or because it has already been uninstalled by the time you are trying to view the event message. For example, if the event message was logged before the application was uninstalled, but you are viewing the event after the application was uninstalled, then you will see this message.

    If the event you are trying to view is important, then you can try to fix the problem yourself by either fixing the registry entry or locating the missing event message file.

    The registry location depends on only two factors: The event log [EVENTLOG] the event was logged to as well as the event source [EVENTSOURCE].

    (Replace [EVENTLOG] and [EVENTSOURCE] with the respective values, and view/add/edit the value EventMessageFile. This is the value that points to the message file)

    If this value doesn t exist, then you can add it as either a REG_SZ or a REG_EXPAND_SZ value. You can specify multiple message files with a semicolon.

    If the message file specified in the value doesn t exist, then you can simply copy it into the appropriate location assuming you can get a hold of it that is :-). Oracle is notorious for not including the message file, in particular with the Express Edition.

    A final note on message files for those of you haven t had enough yet: You can use message files not only to translate event messages, but also for categories, GUIDs and more. Some of the values you might find (mostly in the security event log) are CategoryMessageFile, GuidMessageFile and ParameterMessageFile.

    Well, this article turned out a lot longer than I had anticipated, but hopefully you will have a better understanding as to why this message is logged and what you can do about it.

    8 thoughts on Event Log Message Files (The description for Event ID cannot be found)

    April 28, 2008 at 9:26 am

    I get to know the reason of Event Log being existed in Windows OS.
    This article is, in fact, written in a comprehensible way.
    Cheers!!

    October 21, 2008 at 10:38 am

    Great article. Everything is explained in detail but also in a very easy to understand way. It really help me find what was going wrong with my app.
    Keep up the great work.

    November 19, 2009 at 5:40 am

    on my system (XP) this works only if the MessageFile is under
    %SystemRoot%\SYSTEM32. Didn t find that documented anywhere.

    January 22, 2010 at 7:39 am

    Thanks for the information. It has been very useful because I had a Windows XP Embedded with some event id without description.

    April 19, 2011 at 10:26 am

    All I have been using message files for was translating event messages. Now I know there are a lot more features to be explored. Thanks!

    May 9, 2011 at 9:36 am

    Another note of appreciation for an informative, well-written and useful article.

    May 26, 2011 at 4:15 am

    I was not sure that adding the new value would work but there seems to be no problem. Thanks for the clean solution.

    June 29, 2011 at 8:59 am

    ok, The NTToolKit was exactly ewhat i m looking for thanks

    Leave a Reply Cancel reply

    You must be logged in to post a comment.


    04/08/2017

    Posted In: NEWS

    Tags: , ,

    Leave a Comment

    How To Calculate Bandwidth Utilization Using SNMP #snmp #bandwidth #monitor #free


    #

    How To Calculate Bandwidth Utilization Using SNMP

    There are no specific requirements for this document.

    This document is not restricted to specific software and hardware versions.

    The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

    For more information on document conventions, refer to the Cisco Technical Tips Conventions .

    It is sometimes necessary to calculate bandwidth use with SNMP.

    Use this solution to solve this problem.

    How you calculate use depends on how data is presented for what you want to measure. Interface use is the primary measure used for network use. Use this formulas, based on whether the connection you measure is half-duplex or full-duplex. Shared LAN connections tend to be half-duplex, mainly because contention detection requires that a device listen before it transmits. WAN connections are full-duplex because the connection is point-to-point; both devices can transmit and receive at the same time because they know there is only one other device that shares the connection. Because MIB-II variables are stored as counters, you must take two poll cycles and figure the difference between the two (hence, the delta used in the equation).

    This explains the variables used in the formulas:

    Note: ifSpeed does not accurately reflect the speed of a WAN interface.

    For half-duplex media, use this formula for interface use:

    It is more challenging to calculate for full-duplex media. For example, with a full T-1 serial connection, the line speed is 1.544 Mbps. Therefore, a T-1 interface can both receive and transmit 1.544 Mbps for a combined possible bandwidth of 3.088 Mbps!

    When you calculate the interface bandwidth for full-duplex connections, you can use this formula, where you take the larger of the in and out values and generate a use percentage:

    However, this method hides the use of the direction with the lesser value and provides less accurate results. A more accurate method is to measure the input use and output use separately, with this formula:

    These formulas are simplified because they do not consider overhead associated with the protocol. For example, refer to RFC 1757 Ethernet-utilization formulas that consider packet overhead.

    All of the MIB attributes listed are also in RFC1213 MIB .

    Details of the MIB variables used in these formulas are:


    23/07/2017

    Posted In: NEWS

    Tags: , , ,

    Leave a Comment

    Monitor private network, monitor internal network: Site24x7 #website #monitoring, #free #website


    #

    Monitor your Internal Network via On-Premise Poller

    Site24x7’s On-Premise Poller

    Today’s workforce uses both internet and intranet applications to get work done. The Site24x7 On-Premise Poller complements Site24x7’s global monitoring network of servers by allowing you to install a lightweight, stateless, auto-updating software component in your internal network or private clouds and monitor your mission critical resources along with internet facing websites. It also helps you monitor ping network devices, servers, application servers, database servers, intranet portals, ERP systems, payroll applications and ensure other custom applications are up and performing optimally.

    In short, it can help you monitor resources behind the firewall and ensure that your VMware environment runs at peak performance every time. Site24x7 vCenter monitoring can discover your entire VMware virtual infrastructure through the vCenter server allowing you to discover virtual resources and categorize them into components such as Data Center, Cluster, ESX/ESXi hosts and more.

    What can it do?

    Site24x7 On-Premise Poller can help you monitor ping network devices, servers, application servers, database servers, intranet portals, ERP systems, payroll applications and ensure other custom applications are up and performing optimally. In short, it can help you monitor resources behind the firewall.

    This is possible by support for network protocols and services like HTTPS, SMTP, POP, IMAP, DNS, Port and Ping. Additionally, its flexible architecture can also help you monitor the end user experience of your web applications as experienced by employees at your branch office. This capability is complementary to the agent based server monitoring and public cloud monitoring capabilities of Site24x7.

    How does it work?

    The On-Premise Poller is a lightweight, stateless, auto-updating software component that you download and install in your internal network.

    This software then helps you monitor internal resources and pushes performance and uptime information to Site24x7 using a cloud friendly architecture (one way HTTPS). No holes in the firewall!

    It can also be installed in various branch offices and used to monitor user experience from that location. Since the installed software report to the central Site24x7 servers, you can view consolidated dashboards and reports.

    Why should I try it?

    • Monitor your public and private clouds with Site24x7
    • Add your own monitoring location in addition to the 60+ monitoring locations already supported by Site24x7
    • Be notified instantly about performance or downtime issues via SMS, Email, Push Notifications, Twitter and RSS Feeds
    • Easy to setup and maintain
    • Cloud friendly architecture ensures security of internal resources
    • Enhance the productivity of your Operations and IT teams using a simple to deploy software option
    • Free service to ensure your on-premise monitoring products are working effectively

    How do I get started?


    05/07/2017

    Posted In: NEWS

    Tags: , , , , , , , , , , , , ,

    Leave a Comment